Pressure Reducing Valve for RO System
70 PSI Reverse Osmosis Pressure Reducing/Regulator Valve If your incoming water pressure is higher than 70 PSI, it can cause premature failure of your RO system and may even result in damage, including leakage and potential water damage. We highly recommend adding a pressure regulator if you suspect your water pressure may be too high. Features: Filter Protection Valve 70 PSI, ¼" Inlet/Outlet Quick Fit Connectors Ideal for Reverse Osmosis Systems and any situation where you need to limit water pressure to 70 PSI Designed for use with ¼" tube (0.25” Outside Diameter/0.17” Inside Diameter) Specifications: Limiting Valve: 70 PSI Flow Rate: 7.5L/min at 100 PSI Max Pressure: 230 PSI Max Temperature: 40 °C Installation Notes: Installation must be carried out by a qualified person All pipe work must be flushed before installation Do not apply heat near the valve during installation Must be fitted downstream of the approved isolation valve Must be installed in the direction indicated by the flow arrow Must be installed according to local regulations